Winter-Proof Your Walk: Tips for Preventing Falls
Courtney Carter
/ Categories: WELLNESS, 2024

Winter-Proof Your Walk: Tips for Preventing Falls

As temperatures drop, your risk of slipping and falling on ice and snow goes up. If you’re lucky, you walk away with a bruised bottom and ego. But for many folks, especially those 65 and older, icy falls can lead to broken wrists, hips, and hands and even fatal head injuries. 

Of course, no one anticipates falling, but there are things you can do to reduce your risk. Here’s where to start:

Keep walkways clear of ice and snow. Apply sand or earth-friendly cat litter to well-used walkways and areas that commonly ice over to create traction.
Walk like a penguin. When walking on ice, shuffle your feet only slightly apart for better balance. Bending your knees slightly as you walk will also improve balance. Keep your hands free and out of your pockets to help you balance.

Walk sideways on inclines. When navigating icy inclines, turn sideways. Take small side-steps with your knees slightly bent for better balance and stability. 

Watch out for icy patches. Watch out for invisible ice when exiting cars or when walking up and down outdoor stairs. 

Choose your path wisely. If there are clean pathways with handrails, use them. If the sidewalk is icy, move just off the edge and walk on the snow or grass for traction. 

Wear shoes and boots with proper traction. Flat-soled footwear made of rubber and neoprene composite provides better traction than plastic and leather soles. For especially slippery conditions, you may want to invest in slip-on traction cleats or snow grips, which provide grip on snow and ice.

Use Assistive Devices Wisely.

If needed, use a cane or walker for added stability. Make sure any device you use is properly fitted for you.  Consider attaching an ice gripper to your cane tip or getting wheels specially designed for winter conditions for your walker.

Take your cell phone. Whenever you’re headed out in icy conditions, put your cell phone in your pocket. Having your hands free will help with balance, and if you do fall, you can call for help if needed.

Fall smart. If you feel yourself falling, try to land on something soft and use your arms to protect your head if necessary.

Stay still. If you do fall, resist the instinct to jump right up. Instead, take a few moments—or minutes—to assess any sources of pain or discomfort. If you can’t get up, hit your head, or feel like you may have broken a bone, call 911.

Get up slowly and safely. If you can get up, do it slowly to avoid falling yet again.

With a few simple precautions, you can significantly reduce your risk of falling and safely navigate winter's slippery challenges.

 

Dr. Lisa J. Downing-Forget, MD, MPH practices Geriatric Primary Care at Southwestern Vermont Medical Center.

Print
301

Theme picker


 

 

 

Interview with Jeff Silverman: 3D Printer

Jeff Silverman is a Wilmington native, a volunteer firefighter, and a business owner. From an addition to his Whitingham, Vermont, farm house, his company, Inertia Unlimited, develops camera technology for broadcast television.

"We make them out of thin air," he says.

Actually, he uses a 3D printer to make prototypes and one-of-a-kind cameras for very specific purposes, including those that sit in the dirt in front of a batter during Major League Baseball games and the ones built into NASCAR racetracks.

Over the course of the COVID-19 pandemic, Jeff has printed 463 face shields for first responders in the Deerfield Valley and healthcare workers at Southwestern Vermont Medical Center and other places. He has delivered them free of charge.

When and how did you first become interested in printing shields for first responders? In one day, every job we had disappeared. We went from having 20 – 30 jobs to zero in one day. Our first thought was that we would use the materials and talent we typically use to sew the pouches for our cameras to make masks. But we quickly found that the proper materials and techniques were not available to make effective masks. Plus so many other people were making them. They had it covered.

On Sunday, March 22, I read in the New York Times that a company in Syracuse, NY, had made a design to 3D print face shields available online. By noon that day I was printing. Since then the printer has not stopped.

How does it work? The printer converts the design into a 3D object using filament that is the width of a human hair, adding layer by layer. The printer takes 2 hours to print one shield. I have produced 380 shields so far. That's 1000 hours of printing. I take from midnight to 5 a.m. off. We've done more 3D printing in the last month and a half than we had in the previous 5 years.

Describe the shields. It was important to me to produce something that was good quality. Sometimes the ones you buy don’t clean up very well. These can survive UV light and other sterilization. They are rough and tough.

Where have you distributed them? First I gave them to the firefighters in Wilmington and Whitingham, where I am a volunteer. Then I gave some to the Deerfield Valley Rescue. I have sent 324 to Southwestern Vermont Health Care, some to SVMC Deerfield Valley Campus; Golden Cross Ambulance Service and Sojourns Community Clinic, both in Westminster, VT; and Rescue Inc. in Brattleboro. I sent some to a dentist in Portland, ME, who asked, and 10 to North Central Bronx Hospital to a friend who works there.

What's your greatest accomplishment? I went to Wilmington High School in the late 70s, and Dave Larson, who was the social studies teacher and former longtime VT state representative, had a video camera. He let me borrow it to film field hockey games. At the end of the season, they gave me a varsity letter for my film work. I have won Emmys since, but that varsity letter is special, because it represented the beginning.

What's next? We look forward to reopening. For us, it's the easiest thing in the world. No client ever comes here. We didn't lay anybody off. We hired locals. All are full-time with benefits. We think Vermont is a great place for low-impact companies like ours, and we hope more companies discover Vermont and come here to provide well-paid jobs.

And I am really looking forward to turning the printer off.

On behalf of Southwestern Vermont Health Care's frontline staff, thank you to Jeff for his tireless efforts to provide vital equipment to our teams. We appreciate it!

Theme picker


Theme picker


Theme picker


Our Services

PARTNERSHIP IS POWERFUL MEDICINE

A commitment to excellence and a patient-centered approach sets Southwestern Vermont Health Care apart.

 Cancer Care
 Orthopedics
 Emergency
 Maternity
 Primary Care
 ExpressCare
 Cardiology
 Rehab & Residential Care
View All Services

Theme picker

Theme picker

Theme picker

Theme picker

Theme picker